10.0.0.0.1:

10.0.0.0.1 Comcast Xfinity IP Address Router login

The 10.0.0.0.1 Internet Protocol address can be referred to the 24-bit block of specific IP address. Besides, it is also one of the most used IP address protocol for routers. Router management interface allows modifying the password of your Wi-Fi resolving the troubleshooting network queries as well. You also assure your network greatly with the editing of LAN, DNS as well as Proxy setting.

How to Login 10.0.0.0.1 Comcast Router?

If you want to login 10.0.0.0.1 IP address from your home through routers, it can be easily done following some simple steps:

  1. First, enter the http://10.0.0.1 in the address bar of your browser and press enter button to proceed.
  2. In the login page, you’ll have to enter the default admin username and password for processing the page.
  3. If you’re going to open the router’s admin page, should know that 10.0.0.0.1 admin page doesn’t exist because of carrying an additional zero but it can be easily make adapted through various settings. Login page gives you a chance to change the IP address as well.You can enter 192.168.100.1 also as alternative of 10.0.0.1 if its is not working.
  4. Below are login credentials you can try
  5. The default values for admin are:

  6. Root,User,Admin
  7. The default values for password are:

  8. Motorola,High-speed,Password,W2402

If you aren’t connecting to 10.0.0.1:

Sometimes, it may be due to the lack of direct connection including the security purpose. You’ll also have to make sure the IP address that has been entered correctly where most of the people do the mistake of typing http://10.0.0.1 instead of 10.0.0.0.1 and 10.0 0.0 1. An IP address only has digits & periods and lack of letters. However, for the router management interface, IP 10.0.0.1 is not implied usually. Entering the correct user name and password is the key to open the page so you need to make it sure.

Forget the router’s username and password:

Find Default Router Username and Password List

BRAND MODEL PROTOCOL USERNAME PASSWORD
2WIREHOMEPORTAL Rev. SBC YAHOO! DSL(none)2Wire(none)
2WIREALL WIFI ROUTERSHTTP(none)Wireless

You can easily change your username and password. You should remember that after changing the password earlier, it can be changed later using the data mentioned. You have to go to factory setting to reset from it while resetting the modem. Here, you need to reset your modem that will ensure the log in with the username and password.

Besides, you can also choose the appropriate username and password mentioned in the table if you’ve changed these earlier.

© DMCA.com Protection Status 2019 All rights reserved by 10.0.0.1 - 10.0.0.0.1 Login Admin | Developed by Infoworldsoft